5-V Panels

Reurink’s 5-V Panel is suited for interior use. The unique panel is a great accent panel that can add stylish detail to your project.

Specifications 

Check mark inside a circle, indicating a selection or approval.

Thickness

28 Gauge Steel — .0157” Before Paint, .0176” After Paint


Full Hard 88,000 PSI Min

Check mark inside a circle.

Rust Protection

• AZ50 Galvalume Substrate

A black check mark inside a circle.

Paint System

• Sherwin-Williams Weather XL

A black checkmark inside a black circle.

Sizing

24” Coverage with .75” Rib Height
Minimum Slope: 4/12

Sherwin-Williams Coil Coatings logo. Black text on white background.
WeatherXL logo in white text on a black rectangle.

Standard

Color Selection Guide

Solid, light gray background.
Solid light gray background.
Solid tan background.
Solid light beige background.
Solid background of a muted, warm brown color.
Solid, neutral brown background.
Solid background, muted brownish-gray color.
Solid dark olive green background.
Solid brown background.
Solid red background.
Solid reddish-brown background.
Solid dark maroon background.
Solid gray background.
Solid dark gray background.
Solid dark teal background.
Solid dark green background.
Solid dark green background.
Solid orange background.
Solid teal background.
Solid teal background.
Abstract background with mottled brown, purple, and green tones, with subtle grid-like texture.
Close-up of light gray, textured surface, possibly fabric or plaster, with irregular patterns and subtle shading.

Note: This guide is for the following panel profiles: 28-GA Classic 5-Rib, RX-4, 3/4 Corrugated, Modern Plank, Metal-Lap, Board & Batten, and 5V.

Note: Also available in 26-GA.

Crinkle

Color Selection Guide

Red-brown speckled surface.
Close-up of a dark brown, textured surface resembling asphalt.
Brown, textured surface with small, speckled white and lighter brown elements.
Dark green, speckled texture.
Dark speckled granite surface.
Dark brown granite countertop speckled with lighter-colored minerals.
Brown speckled background.
Gray speckled surface.
Gray speckled background with white flecks.
Dark gray textured surface with scattered lighter specks.
Textured white surface.

Note: This guide is for the following panel profiles: 28-GA Classic 5-Rib, RX-4, 3/4 Corrugated, Modern Plank, Metal-Lap, Board & Batten, and 5V.

Three metal flashing samples in gray, white, and brown with a foam backing.

SOFFIT & FASCIA

Specifications 

Checkmark icon inside a circle.

Solid and vented steel soffit

Check mark in a circle.

Custom soffit cuts FRP, 11” to 12’

Checkmark inside a circle.

3.5” to 8” fascia widths

Check mark inside a circle.

Over 20 color options

Speak to one of our experts!

All of our staff are extremely knowledgeable in their trade, when you choose Reurink you're getting unmatched customer service every time.